| |
| VERTICAL GEL SYSTEM |
|
The Enduro Vertical PAGE System is modular - allowing PAGE,
electroblotting and 2D gel electrophoresis to be carried out in the same
tank, simply by changing the inserts. Users can purchase only the parts
they need, or a complete combined system for a cost savings over buying
all three systems separately.
Modular System
The modularity of the Enduro System is based on three operational
inserts and a common buffer tank. All three inserts, PAGE,
electroblotting and 2D electrophoresis, have their own electrode
assembly that connects into the lid of the buffer tank.
|
PAGE Insert
Set up of gels is quick and easy with the PAGE insert. A set of plates
are placed on either side of the insert and held into place by the
pressure bar. An additional gel may be run on each side by stacking the
plates. The assembly
is then placed into the casting stand for pouring the gel. After the
gel is polymerized, the insert is removed from the casting stand and
placed in the buffer tank.
|
|
 |
Electroblotting Insert
The electroblotting insert has a capacity for 3 gels. Setting up blots
is easy - gels are sandwiched in the blotting cassettes with the
transfer membranes. The cassettes are then placed in the insert, which
is in turn placed in the buffer tank. Coiled electrodes in the insert
generate a high intensity current, allowing transfer to take place in
about
an hour.
|
|
 |
2D Electrophoresis Insert
This insert is used for running the first dimension of IEF gels. Up to
ten 8 cm gels are poured in disposable capillary tubes and placed in
this insert. Gasketed ports allow for easy insertion and removal of
tubes. Blocking plugs are included for closing off ports that are not in
use.
|
|
 |
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| HORIZONTAL GEL SYSTEM |
|
A VARIETY OF SIZES
are available, from a mini gel system to a large maxi gel system that can accommodate as many as 450
samples in a single run. A wide range of accessories are available to customize your system, including
multichannel compatible gel combs.
QUALITY CONSTRUCTION
The Enduro gel tanks are molded for leakproof performance and a long service life. The corrosion resistant
platinum electrodes are located in cassettes to protect them during cleaning and provide for easy replacement.
The lids fit on the gel boxes in only one direction. A drip ring on the lid recycles condensed buffer
and prevents it from dripping directly onto the gel
|
|
EASE OF USE
Casting gels for the Enduro system is very easy. Simply snap the rubber gates onto the ends if the tray,
place the comb in position and pour the gel - no taping is necessary. Slots on the sides of the gel trays hold
the combs in place. The two piece combs are designed so that the teeth can be raised or lowered to vary
the depth of the well within the gel. The supplied combs are 1.5 mm thick. Combs of other thicknesses are
available separately. After the gel has hardened, the combs and gates are removed and the gel and tray
placed in the gel box. Loading strips may be placed on the bottom of the gel box to aid in well visualization.
Gel trays are UV transparent.
DESIGNED FOR SAFETY
The power leads for the Enduro system are attached to the gel box lid. The connection with the electrodes
is made only when the lid is properly in place. Removal of the lid removes power from the system. Side
tabs and pressure pads make lid removal easy and prevent sloshing of buffer.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Enduro 7x7
Unit Dimensions 9 x 21 x 9cm
Gel Size 7 x 7cm
Maximum Samples: 32
Buffer Volume 225mL
|
|
|
|
|
|
|
|
|
|
|
|
|
Enduro 7x10
Unit Dimensions 9 x 21 x 9cm
Gel Size 7 x 10cm
Maximum Samples: 64
Buffer Volume 225mL
|
|
Enduro 10x10
Unit Dimensions 12.5 x 22 x 9cm
Gel Size 10 x 10cm
Maximum Samples: 100
Buffer Volume 300mL
|
|
|
|
|
|
|
|
|
|
|
|
|
Enduro 15x10
Unit Dimensions 17.5 x 26.5 x 9cm
Gel Size 15 x 10cm
Maximum Samples: 140
Buffer Volume 500mL |
|
Enduro 15x15
Unit Dimensions 17.5 x 26.5 x 9cm
Gel Size 15 x 15cm
Maximum Samples: 210
Buffer Volume 500mL
|
|
|
|
|
|
|
|
|
|
|
|
|
Enduro 20x20
Unit Dimensions 23 x 39.5 x 9cm
Gel Size 20 x 20cm
Maximum Samples: 450
Buffer Volume 1200mL |
|
Construction: Molded Acrylic
Safety: Unidirectional safety lid
UV Transparency: Gel tank, trays and lid
Gel Casting: Rubber gates supplies
Combs: Height-adjustable
Comb Thicknesses: 0.75, 1, 1.5 and 2mm
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Per l'elenco completo dei prodotti CLICCA QUI
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Per ulteriori informazioni CONTATTACI
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
